how to build a washer and dryer cabinet

DIY cabinet making steps

Nov 25,  · Remove the washer and dryer from the room. Rip the first piece of plywood to length. Cut the two side pieces of the cabinet from this piece of oak plywood. Cut a 2-by-6 to the desired lengths, and attach the lumber to the base of the cabinet. Oct 04,  · To design the cabinet, you'll have to decide whether you want the cabinet to go all the way from floor to ceiling or whether the cabinet will require a top piece to go over the stack. This is mostly personal preference but can also depend on the placement of the washer-dryer .

Summer is good for many things. Being a productive blogger it is not. This has been such an awesome addition to our laundry room makeover.

One of my constant battles with doing laundry was having something rattle off the top of the machines and fall into the abyss on the sides, in between, or behind. I also had problems with the pedestal Mike and I built several years back. If needed, you can also attach another support piece to the back wall to support the table top. This is to support a removable shelf I made to hide the hook ups. It will sit at the same height as your side supports. It is supported mostly by the back L bracket and then also the side supports.

To hide the hook ups and electrical outlets I made a T-shaped ledge out of the remaining panel. It is also not attached to the wall so that it can be removed if need be. The top of the ledge sits dryeer top of the support piece on the back wall. Looks awesome, Shelly. This is in my to-do list. The wood is already and waiting in the garage, just need what went down pearl harbor find some time to get to it.

It turned out beautiful. God your good. So jealous. I need you to move into my house for like a month. I'll take care of your children and make sure you have plenty of margaritas. This is such a perfect solution. I have the same problem in my laundry room with the hose box and outlets showing. I will have to take a look to see if I can do something like this.

Cabiney do have a sink next to mine so I will have to work that in some how. Great tutorial! You will LOVE it!!! Nothing drove me more crazy than loosing a sock or something to the abyss behind or in between the machines.

There's just fo much workable space now too. It keeps me from having to drag all the dreyr laundry to my bedroom for folding. I think you can totally make this work with a sink nearby! I picked them up from Lowes, but I'm sure most larger home improvement stores have something similar. I'm wondering what the dimensions are for the t-shaped ledge.

Hi Shelley, How did you attach amd t-bar to the back? Curious if the shimmy from the machines kept it loose? There's no problem with it shimmying because the table is built up from the machines instead of resting on them.

Great idea! I love it. Do you have to take them out, disessemble the table, or is there a solution? Hi Brianna! That way you could remove the top all together if needed. Hope this helps!

I love this! I especially like how you dealt with the connections being higher than the washer. My husband suggested that we needed xnd for the washer and drier. Do you find that being an issue? Thank you! Did you prime how to block spyware on your cell phone Did you seal it to make it more resistant to water? Hi Meredith! The paint is Benjamin Moore Dgyer White, regular interior satin.

I did use primer. Unfortunately, the stain on the table top was a mixture of some leftover stains I had in the garage. How would you support the countertop if one side is open with a sink beside it? Any ideas? Get all the latest posts straight to your inbox. Buipd pieces one for each side will go horizontally on the sides to hold the table top and two pieces one for each side will go vertically so the side facing will have something to attach to.

Make sure you are level! This was later filled in with wood putty, sanded, and caulked. Depending on your situation, you may not need this step. I attached it to the back of the wall into studs so that it would support the center of the table top.

Attach the table top. I used two pine panels for my table top. Finishing work! Fill holes with wood filler, sand it all down, caulk the side pieces where it meets with the walls and floor to give it a finished built in look, and then paint and stain.

Now you can rejoice in no more socks getting lost between the cracks! Or stash more junk. Click here to see full source list and more how to tell if a girl likes you the laundry room reveal! What is babe ruth best known for Facebook Twitter Email. Subscribe Get the latest posts delivered straight to your inbox! Comments i love this idea!

It turned out great. I'm gonna have a real laundry room like yours when I grow up. There's about an inch from the top of the machines to where the counter begins.

Hi David! You might also like. Sorry, your blog cannot share posts by email.

Make your cuts

Jun 23,  · I’ve been meaning to share with you guys how I built in the washer and dryer for a few weeks now. Summer is good for many things. Being a productive blogger it is not. I don’t know if I should call this project a built in washer and dryer or a washer and dryer folding table. I guess it’s both. May 13,  · Technology upgrades to washers and dryers have changed how we do laundry. Before you start a load of laundry, remember these key points. Upkeep: To reduce buildup in a front-load washer dispenser drawer, use only high-efficiency detergent and bleach. Detergent and fabric softener may build up in the dispenser drawer. Jun 24,  · Building the Washer and Dryer Stand Base. The key to the laundry pedestal project is to make the pedestal sturdy, especially for front-loading washers, since they have a tendency to move around if they’re not on a solid, level surface. Read Next. How to .

April 22, I received compensation and only partner with brands I truly believe in. Hey there! Thanks for stopping by to learn how to make and install DIY cabinets. Over the past six months I've been busy renovating my fixer-upper home out in Montana. It has been a lot of work, but the reward of getting exactly what I want is going to be worth it. One thing I needed in the laundry room was a little organization around the washer and dryer , so here is one of the first projects!

In this post, I'll be walking you through the process of making DIY cabinets to help organize your home. For me, these will be for my laundry room. Cabinet uppers are a fairly simple DIY project that will provide plenty of storage for your detergent, softener, cleaners, rags, and much more.

These DIY cabinets can be modified to any size and customized to fit your space. Not to mention, they clean clothes better than any washer and dryer we've ever owned. They are backed by a year limited parts warranty, and are made to last! I've saved the best part for last May is Maytag Month! The brand is offering powerful deals from May 3 - June 6 on kitchen and laundry appliances, so make sure to visit here for more details.

The DIY cabinet uppers we made are a pretty typical size for cabinet uppers. The width is 30 inches and the depth is 12 inches. The beauty of building your own cabinets is you can customize them exactly how you'd like to best fit your space. Start by cutting the plywood down to size to form the cabinet carcass. You'll make two side panels, a top, bottom, and back..

I would recommend using a table saw for this process. Once cut on the table saw, you can cut the ends down to size with a miter saw. The next step is to assemble the four sides of the cabinet. We'll do this using pocket holes for today's project. Drill four pocket holes on the ends of the top and bottom horizontal boards.

The blue tool in the photo is called a Kreg jig. The horizontal boards are placed inside the two vertical boards. Pocket holes are drilled on the back side of the cabinet piece. Tap with a rubber mallet to get it lined up perfectly. Cut the boards to length using a miter saw. Then use a pocket hole jig to create two pocket holes on the ends of each horizontal board.

Next, screw and glue the face frame together. Once assembled, attach the face frame to the cabinet carcass. This is the easiest way to attach the face frame if you are planning on painting the cabinets. The nail holes can easily be filled with wood putty and then painted over. Here is a photo showing the face frame once attached to the carcass. The top of the face frame is flush with the top of the cabinet carcass.

Use a jig to make the shelf support holes. I used an 8 inch long board as a spacer underneath the jig. Then insert shelf support pins. Cut a shelf out of plywood to fit inside the cabinet. Add glue in the slots and on the tongues. Clamp the two stiles vertical pieces to the rail. Add the final rail and apply clamps. Wipe up excess glue, and let the door cure. A jig makes it easy to create the hinge holes so everything will get lined up correctly.

Sand the doors and face frame prior to painting. The seams on my cabinets were not all perfectly flush, but sanding will flatten them out. I like to test fit the doors prior to painting. This only takes a few minutes and is well worth it just in case any size adjustments need to be made. Fill in pinholes with wood putty and tape inside the face frame prior to painting. Apply banding to the plywood shelves if you'd like a more finished look.

Use a foam roller to apply your paint. I picked up some cabinet paint from the hardware store. It had enamel in it for durability and the rollers and brushes clean up with water. It took quite a few coats as the paint was somewhat thin.

Use a brush to get the hard to reach areas. The door pulls are 10 inch pipe handles. The jig I typically use to mount hardware wasn't big enough for the larger handles, so I made a custom jig to ensure the pulls lined up correctly with the screws.

Determine the height you'd like to hang our cabinets. I hung the cabinets at 54 inches from the ground which is pretty standard. Attach a ledger board to the wall to help hold the cabinets while you are installing them. Find the studs in the wall and attach the cabinets to the studs in the wall with screws. I hope this tutorial inspires you to build or install cabinets in your own home!

Learning to build cabinets is a process and it takes time, but the skills you'll learn will be well worth it. For those of you who would prefer to buy cabinets, you can typically by stock cabinets at the larger hardware stores or special order custom cabinets. Hanging cabinets is quite easy and definitely doable for a DIY'er. If you are researching washers and dryers, I would highly recommend taking a look at the Maytag brand, especially during their May is Maytag Month promotion.

They work great! Pete Sveen is an avid DIY'er, outdoorsman, pilot, and online business enthusiast. Please log in again. The login page will open in a new tab. After logging in you can close it and return to this page. Share 0. Tweet 0. Pin 0. DIY cabinet making steps. Make your cuts. Assemble the cabinet box. Attach the cabinet back. Build and attach cabinet face frame. Drill shelf support holes. Build the doors. Make hinge holes, sand, and test the door fit.

Attach door hardware. Here is a look at the finished cabinets before hanging them. Mount the cabinets. Enjoy your new cabinets! Best of luck with your DIY projects and cheers from Montana! About the author. Pete Sveen. Close dialog. Session expired Please log in again.